technical data datasheet 5309 , rev a ? 20 1 4 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 tel: (631) 586 - 7600 ? fax: (631) 242 - 9798 ? www.sensitron.com ? sales@sensitron .com SDA1004 ss diode array ? devices are serialized ? built and screened to space level quality ? space quality level conformance testing is performed on each lot max. rati ngs / electrical characteristics for each diode all rating at are t a = 25 o c unless otherwise specifie d rating symbol max unit peak inverse voltage (dc) piv 75 v average dc output current per diode i o 5 0 m a peak single cycle surge current (1) (2) (t p =8.3ms single half - sine wave ) i fsm 500 m a peak repetitive surge current (1) (3) (t p =8.3ms half - sine wav e) i frm 300 ma steady state power dissipation per diode junction p d 400 mw steady state power dissipation per package (3) p t 500 mw max. operating junction temperature t j - 65 to +150 o c storage temperature range t stg - 65 to +200 o c max. forward volta ge i f = 10ma v f 1 1 v max. forward voltage match i f = 10ma v fm 5 mv max. reverse current v r = 20v v r = 40v i r 1 i r 2 50 100 na max. reverse recovery time i f =10ma, i rm = 10ma t rr 10 ns max . capacitance f= 1mhz, v r = 0 v c t 5 pf note: (1) each diode (2) derate at 2.4ma/ 0 c above 25 0 c (3) derate at 4.0ma/ 0 c above 25 0 c
technical data datasheet 5309 , rev a ? 20 1 4 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 tel: (631) 586 - 7600 ? fax: (631) 242 - 9798 ? www.sensitron.com ? sales@sensitron .com SDA1004 ss electrical schematic
technical data datasheet 5309 , rev a ? 20 1 4 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 tel: (631) 586 - 7600 ? fax: (631) 242 - 9798 ? www.sensitron.com ? sales@sensitron .com SDA1004 ss mechanical outline disclaimer: 1 - the information given herein, including the specifications and dimensions, is subject to chang e without prior notice to improve product characteristics. before ordering, purchasers are advised to contact the sensitron semiconductor sales department for the late st version of the datasheet(s). 2 - in cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users fail - safe precautions or other arrangement . 3 - in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the users units according to the datasheet(s). sensitron semiconductor assumes no responsib ility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4 - in no event shall sensitron semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5 - no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6 - the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of sensitron semiconductor. 7 - the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applic ation will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. when exporting these products (technologies), the necessary procedures are to be taken in accordance w ith related laws and regulations. 16 9 8 1 .115 max .030.005 .350.005 .017.003 .050.003 .430 max .300 min .005 +.003 -.001 .125 min .280.010 .300 min
|
